## How balanced should LiPo cells be?

It’s generally accepted that a difference of 30 – 50mV (. 03 – . 05v) between cells is acceptable, but different manufacturers might state different amounts. So, the specifications for your particular pack, where available, should be read and followed.

What is 2s2p in LiPo battery?

2P means that 2 cells are connected in parallel. When cells are connected in series, it increases the voltage. So 2 LiPo cells in series will create a 7.4V battery. 2P means that 2 cells are connected in parallel.

How long does it take to balance a LiPo?

It normally took about 35 minutes. (the pack has 30 cycles on it and started taking this long to charge after about 20) My other packs also charge in 30-35 minutes. It is balanced and runs fine with no puffing or anything of that nature.

### What does Balanc Dlta V mean?

The charger show balance delta v is mean the voltage difference more than 0.3v, it is not safe if charge in this condition. The charger won’t charge because of the the built-in protection. One cell of the battery is defective.

How do you discharge a LiPo battery for storage?

LiPo Battery Disposal

1. Discharge the LiPo battery as far down as you safely can. You can do this a number of ways.
2. Place the LiPo in a salt water bath. Mix table salt into some warm (not hot) water.
3. Check the voltage of the LiPo. If the voltage of the battery is 0.0V, great!
4. Dispose of the battery in the trash.

How often should you balance charge a LiPo?

But my 1/8 buggy I balance them every time a charge, because one cell in all my packs always seems to pull one cell lower then the rest. A good battery should be able to hold a good balance between cells for a month without a problem. But if your charger already have a balancer built in you might as well use it.

#### What is LiPo balancing?

Balancing is a term we use to describe the act of equalizing the voltage of each cell in a battery pack. We balance LiPo batteries to ensure each cell discharges the same amount. This helps with the performance of the battery. It is also crucial for safety reasons – but I’ll get to that in the section on discharging.

What does 2S2P mean?

2S2P = A battery with 2 cells in series and 2 cells in parallel.

What is 2s 2p battery?

This battery pack is equivalent to a 7.4V lithium ion battery pack. The 2S2P battery pack specifications make it suitable for power tools, laptops, consumer electronics, and many other applications.

## How long does an 11.1 LiPo take to charge?

If your battery is 3S 11.1V 1200mAh , It can take 1 or 2 hours to charge full, if your battery is over 12000mAh 3S Lipo battery, It may take over 10 hours to charge full.

What is considered a balanced LiPo battery?