What does red light mean on Plantronics headset?
Red light is off indicates the headset is in the base, fully charged. Red light is dimly lit indicates your headset is not in the charging base. Red light is brightly lit indicates that your headset is currently charging.
How do I setup my Plantronics wireless headset?
To pair the headset,
- Turn on your device’s Bluetooth feature.
- Turn the headset on. The light on the headset should start flashing an alternating red-blue.
- On your cell phone, go to the Bluetooth menu and search for (or add) a device.
- If prompted for a passkey, enter 0000 (four zeros).
How do I connect my poly headset to my desk phone?
Plug the small (RJ9) end of the telephone connection cable into the handset port of your telephone. Plug your telephone’s handset into the handset port on the MDA200’s telephone connection cable. Plug your Plantronics supported USB corded headset or wireless USB headset adapter to the MDA200 headset port.
How do you know when your Plantronics headset is charged?
To charge these headsets, simply slide them into the charging base and be sure that the amber light (on the left side of the base) begins flashing. When the amber light becomes solid, the headset is fully charged. If your headset does not turn on (no green light), then your battery has no charge.
Why is my Plantronics headset blinking green?
The green LED on headset itself indicates the status of the connection between the headset and the base: Off – The headset is in standby mode and saving battery power. Blinking slowly – The headset is active and ready to use. Blinking very rapidly – The headset is not linked to the base station at all.
How do I program my Plantronics headset?
Start with your headset powered on. Press and hold the call control button for 5 or 6 seconds until the light starts flashing red and blue (some models flash red and white). Release the button and set the headset aside. Follow the pairing instructions for your cell phone or other Bluetooth device.
How do I use my Plantronics headset?
Using your wireless headset with remote call answering accessory (Recommended and preferred)
- Remove your Plantronics headset from the charging base and place it on your head.
- When a phone call comes in, press the on button on your headset and you’ll be on the call (works up to about 350 feet away from your desk)
How do I pair my Plantronics CS510?
How to Pair or Connect the Plantronics 510 Bluetooth Headset to your Bluetooth phone
- Turn on Bluetooth within your phone.
- Put phone into pairing mode.
- Put headset into pairing mode.
- Select “Add new device” on your phone.
- Select the Plantronics headset when prompted.
Can I use Plantronics CS540 with laptop?
Q: Can the CS540 connect to my PC to use with software like Skype? A: The CS540 is traditionally used with your desk phone. However, if you would like to use it with your PC, you can purchase the Savi D100 USB Dongle or the APU-75 EHS cable.
How to connect Plantronics to iPhone?
On your iPhone,press Settings > General > Bluetooth.
How to connect Plantronics earpiece?
Turn on the Bluetooth feature of the mobile phone. The Bluetooth feature is found in the “Settings” or “Tools” menu of most phones under
How do I Reset my Plantronics headset?
Turn on the headset by pressing the “Power/Answer” call button. The blue light flashes to let you know that the headset is on. Hold down the “Power” button and the “Lower Volume” button (minus button) together until the light goes out. Wait for one minute for the reset to be complete.
How do I Pair my Plantronics Bluetooth?
To pair most Plantronics headsets to a phone, turn on the phone’s Bluetooth, press the headset’s power button until the nearby light flashes, release the button and finish with the phone’s pairing instructions. Enter the passkey 0000 if prompted.