What is a wireless relay?

A relay network is a broad class of network topology commonly used in wireless networks, where the source and destination are interconnected by means of some nodes. He passes the message to the first node, or person, who passes it to the second and so on until it reaches the girl and she reads it.

What is an Ethernet relay?

Ethernet Relays are controlled by sending commands through your local area network or internet to the board. Once on the network, commands can be sent to control the relay from within the network or from outside over the internet. …

How many relays can be connected to NodeMCU?

Wiring 8 Channel Relay to ESP8266 NodeMCU For demonstration purposes, we’re controlling 5 relay channels.

What is Bluetooth relay?

Bluetooth Relays are ideal for mobile connectivity and automotive applications. Bluetooth Relays have a wireless range of 300 feet and can communicate directly to most mobile devices. High speed and standardized Bluetooth Communications. Free Android Application to Control Many Series of Boards.

What is relay in computer?

When relating to a computer or communications, the term relay commonly refers to the act of taking information and passing it to another location. With electronics, a relay is a device with a low power source that powers an electromagnetic switch to control (turn on and off) a higher current.

What is optocoupler relay?

So what is an Optocoupler Relay? A relay operating on the principle of opto-isolation, i.e. there is no direct or hardwire connection between the controller and the relay. And because there is no hardwire, the controller will remain protected against the high voltages that might harm the controller.

What is the difference between ESP32 and ESP8266?

What’s the difference between ESP32 and ESP8266? The ESP32 is a dual-core 160MHz to 240MHz CPU, whereas the ESP8266 is a single-core processor that runs at 80MHz. These modules come with GPIOs that support various protocols like SPI, I2C, UART, ADC, DAC, and PWM.

How do I control a webrelay relay?

Web Control. Simply connect the relay contacts to the device to be controlled, and switch the relay on and off remotely using a web browser (see Figure 1). WebRelay provides an optically-isolated input which allows you to monitor the state of a device or control the relay contacts by applying a voltage.

What is the purpose of a relay?

It controls the opening and closing of the circuit contacts of an electronic circuit. When the relay contact is open (NO), the relay isn’t energize with the open contact. However, if it is closed (NC), the relay isn’t energize given the closed contact. However, when energy (electricity or charge) is supplied, the states are prone to change.

How do I operate the webrelay using the digital input?

Control Using Digital Inputs WebRelay can also be operated by using the optically-isolated input. The optically-isolated input can be configured to turn the relay on/off, pulse the relay, toggle the relay, latch the relay (for alarming), etc.

What is the difference between a webrelay and an Ethernet relay?

Connect a WebRelay unit to a door sensor at your office, factory, store, etc. An Ethernet Relay is connected to any IP (Internet protocol) network and given an IP address. With a standard CAT 5 Ethernet cable you can connect to your local area network, wide area network, or the Internet for easier remote access to your monitoring and control.