Interesting

What toner does Brother MFC-9970CDW use?

What toner does Brother MFC-9970CDW use?

Black toner (TN-315BK) used on the Brother MFC-9970CDW has an estimated yield of 6,000 pages at 5 percent coverage. Each color—in cyan (TN-315C), magenta (TN-315M), and yellow (TN-315Y)—has an approximate yield of 3,500 pages at 5 percent coverage. Pros: Multifunctional features.

What is the highest yield toner cartridge?

The printer’s toner cartridges are its greatest selling point, with the TN880 super high yield cartridge printing up to 12,000 pages. The standard yield TN820 and high yield TN850 toners are also available for consumers that print less.

How do I get more life out of my Brother toner?

To enable or disable Continue Mode, follow the steps below:

  1. Press the Up or Down arrow key to choose General Setup, and then press OK.
  2. Press the Up or Down arrow key to choose Replace Toner, and then press OK.
  3. Press the Up or Down arrow key to choose Continue or Stop. Press Go.

How do you reset the toner on a Brother MFC 9970CDW?

Here are the steps to access the cartridge Reset Menu on the MFC-9970CDW.

  1. Open front cover.
  2. Close front cover.
  3. Upon “Please Wait” message, open front cover again.
  4. Upon “Close the Front Cover” message, press number 1 on keypad.
  5. Observe Reset Menu.
  6. Select cartridge to reset. (
  7. Press Stop/Exit button.
  8. Close front cover.

Is Brother High yield toner worth it?

High yield cartridges are more expensive but are often worth the extra money for print heavy consumers. If you print regularly, paying a little bit more for a high yield cartridge is worth it in long run because you will usually get a lot more prints than your average standard yield cartridge.

Should you buy high yield toner?

Though they do cost more upfront, they almost always save time and money in the long run. Organizations that often use high-yield toners will regularly produce large print jobs and/or have a high print volume.

How can I get more out of my toner?

To extend the life of your toner, remove the toner cartridge, cover it with a paper towel, and shake to redistribute the powder. Unclog the nozzle — Clogged toner cartridge nozzles can lead to skipping and inconsistent output. Using a damp paper towel, wipe the bottom of the cartridge.

Why is my Brother printer using so much toner?

If you feel that the ink cartridges run out very quickly every time you replace the ink, it’s possible you are printing high density documents frequently. Especially when you print a document with a higher density of background on it, a bigger amount of ink will be used.

How do I check the toner level on my Brother MFC-9970CDW?

Here is how to check your toner level on your Brother MFC-9970CDW:

  1. Make sure your printer is ON.
  2. Press “Menu” button on your touchpad.
  3. Press the following numbers on the keypad : * 2 8 6 4.
  4. A new menu should appear on the screen.
  5. Press the following numbers on the keypad: 7 7.