How do you cut KuraStone?

Use a miter saw with a diamond-tipped fiber cement or masonry blade when cutting KuraStone. KuraStone MUST be stored flat and off the ground prior to installation. Storage of siding on pallets is recommended.

How thick is nichiha siding?

Nichiha gives you the perfect match — the beauty of wood backed by the brawn of fiber cement. THICKNESS (ACTUAL MM) 3/4” (18MM) WEIGHT (LBS. PER PANEL) 41.6 WEIGHT (LBS.

What does nichiha mean?

It’s called Nichiha, a type of fiber cement siding developed by a Japanese manufacturer. Nichiha previously focused on the commercial market but has moved into the residential market in recent years.

What is Kura stone?

KuraStone™ reduces material costs and simplifies installation for a double-dose of budget help. Its rugged texture and color variations add interest and charm as an accent or as the main attraction. There is no scratch coat, no metal lath, no mortar or even a need for a specialized stone contractor for installation.

How do you drill into fiber cement siding?

How to Drill Holes Through Cement Fiber Siding

1. Mark the siding where you want to drill the hole.
2. Place the siding on two 2-by-4s, so that the mark is between the boards, for support, when the siding has not been installed. Otherwise, the board siding may snap during drilling.
3. Place the carbide drill bit in the drill.

How much do nichiha panels weigh?

What size are nichiha panels?

Before you jump into the design process, we recommend taking a minute to familiarize yourself with the dimensions of Nichiha’s family of Architectural Wall Panels. All panels have the same height (455mm) but are either 1818mm or 3030mm wide.

How do you install nichiboard?

For a more aesthetically pleasing installation, NichiBoard may be installed in a hidden, or blind nail application. Position the fastener 1” down from the top edge of the board and no closer than 3/8” from the board ends. Fasten from one end of the board to the other.

How do I install a nichipanel over a shimmed siding?

• Install flashing on top of the shim, taking into consideration the thickness of the trim. The flashing must extend slightly past the edge of the trim. • Next, install the NichiPanel above the shim and allowing a ¼” gap between the siding and flashing. • Install the horizontal trim to cover the shim, under the flashing.

How many nails do you use to install siding?

HORIZONTAL INSTALLATION (Vertical Furring Strips) Nailing 1″ x 6″ siding Rabbeted Bevel – One nail every 16″ at 1″ from the bottom of the board [FIGURE 14]. V-Joint and Modern – Two nails every 16″ at: • 1″ from the bottom of the board. • 1/2″ from the bottom of the smooth portion of the board [FIGURE 15].

How do you install a nichiha panel?

NICHIHA INSTALLATION GUIDE FOR NICHIPRODUCTS 18 Measure and trim the first piece in the second course so it is one stud cavity less in length than the first piece on the previous course. If framing is spaced 16” on-center, begin the third course by again cutting the panel one stud cavity less than the first piece on the second course.