What does recirculate on a multiport valve do?
RECIRCULATE. This setting is used to bypass the filter during certain pool cleanups and chemical treatments when you don’t want the water contaminating the sand. Water enters the valve through the “PUMP” port and exits back to the pool through the “RETURN” port.
When should you run pool on recirculate?
Reviewing Recirculation This setting is used infrequently, but is helpful when you want to mix newly added pool chemicals or when you need to keep the pool water moving while you perform filter repairs.
How long can I leave my pool pump on recirculate?
You should run your pump/filter as long as it takes to keep the pool clean. Some pools have great circulation combined with low use, therefore run times can be quite short.
How do you backwash a pool with a multiport valve?
Backwashing Instructions “Multi Port” Valve System
- Turn Pump Off.
- Rotate Handle To “Backwash” Position (Always Rotate Clockwise)
- Turn Pump On (If You Have A Separate Backwash Valve, You Will Have Open That Line)
- Pour 8oz. (
- Backwash Until Site Glass Is Clear Or Between 5 & 15 Minutes.
- Turn Pump Off.
Are multiport valves universal?
Multiport valves fit only certain specific filters, and are not interchangeable among filter models or brands or filter type.
What are the models of the Pentair multiport valve?
Multiport Valve Models: Pentair Multiport Valve parts list for easy ordering of parts for your Multiport Valve. Models: 261124,261185, 261177,261173,261055,2611152
What is the multiport valve for a Triton filter?
The Multiport Valve Parts pictured above are designed for the Pentair (formerly PacFab) Triton and Tagelus Sand Filters. The Top-Mounted Backwash Valve is for the Tagelus Filter, and the Side-Mounted Multiport Valve is designed to fit the Triton II (2) Sand Filter.
What parts are required for the Pentair sm-20-3 multiport valve?
The parts listed below are designed for the Pentair SM-20-3 Multiport Valve. Screw – M6 x 30mm s/s, 6 required for SM-10-3, SM-20-3 Multiport Valve Nut – bulkhead adapter, 2 required for SM-10-3, SM-20-3 Multiport Valve Adapter 1.5″, Bulkhead, Threaded, for SM-20-3 Multiport
What is the difference between the side-mounted backwash valve and multiport valve?
The Top-Mounted Backwash Valve is for the Tagelus Filter, and the Side-Mounted Multiport Valve is designed to fit the Triton II (2) Sand Filter. The Top part of the Valve (Pictured at Left) can be purchased as one-unit (See Key #1).
https://www.youtube.com/watch?v=mMFPEyl2tPQ