How do I reset my Lexmark Fuser?

From the printer control panel, press System. Press or repeatedly until Admin Menu appears, and then press OK. Press or repeatedly until Maintenance Menu appears, and then press OK. Press or repeatedly until Reset Fuser appears, and then press OK.

How do you change a Lexmark Fuser?


  1. Power off the printer.
  2. Open the left side cover (also called door A).
  3. Turn the two thumbscrews at each end of the fuser counter-clockwise.
  4. Lift out each of the fuser hooks.
  5. Using the fuser hooks, carefully pull the fuser unit out of the printer.
  6. Remove the new fuser unit from the packaging.

What is a fuser on a Lexmark printer?

The fuser unit/fuser assembly is the part of the printer that heats up to melt or “fuse” the toner onto the page. The fuser unit is located at the back of the printer, just inside the rear exit door. The fuser unit can be replaced separately or as part of the maintenance kit.

How do I fix a fuser error on my printer?

Solution one: Reset the printer

  1. Press the Power button to turn off the printer.
  2. Disconnect the power cord from the rear of the printer.
  3. Wait 30 seconds, and then reconnect the power cord.
  4. Press the Power button to turn on the printer. Wait for the product to start.
  5. Try printing again.

What does fuser life warning mean?

When the “Fuser Unit Near Life” message appears on the display screen, prepare a replacement fuser unit. When the “Change Fuser Unit” message appears, replace the fuser unit. The life expectancy of the fuser unit is up to 60,000 pages for A4 simplex printing.

Is the Lexmark ms811n a network ready laser printer?

The Lexmark MS811n network-ready laser printer with an 800 MHz dual-core processor and 512MB of memory prints up to 63 ppm. Improve your print speeds by taking advantage of up to 2.5 GB of memory, an 800 MHz dual-core processor and Gigabit Ethernet.

How to install Lexmark ms811/ms812/ms810de printer driver in Linux?

Print-Drivers-LMADP DRV.plugin;Lexmark MS811, Lexmark MS812, Lexmark MS812de, Lexmark MS810, Lexmark MS810de;This plug-in package adds printer device support for Lexmark Printer driver in UNIX and Linux systems, version or later. Once downloaded, install the plug-in by selecting Software Update from the printer driver File menu.;1.0.0

Where do I find the fuser code on my fuser?

The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the fuser. Using certain types of paper may require more frequent replacement of the maintenance kit.

What is the Lexmark Universal Print Driver?

The Lexmark Universal Print Driver provide users and administrators with a standardized, one-driver solution for their printing needs.