What is CANcaseXL?

CANcaseXL log combines two products in one device: A professional CAN/LIN/J1708 bus interface with USB 2.0 interface and a logger for simple logging of bus traffic during test drives or in the test laboratory.

Does CANcaseXL support can FD?

This applies for the follwing products: CANcardXL. CANcardXLe. CANcaseXL (log)…

Device Hardware Channels Description
VN1630(A) CAN (FD), LIN/K-Line, DAIO Successor of CANcaseXL
VN1630(A) log CAN (FD), LIN/K-Line, DAIO Successor of CANcaseXL log

How do I open vector hardware config?

Open Vector Hardware Config from the Control Panel. If properly installed, the hardware will appear with its serial number in parentheses. Click the plus (+) sign next to the hardware to display the hardware channels available.

Can Case XL Vector price?

CANCaseXL – Vector Informatik The Vector options these days are limited and pricey, and you will end up spending about $1000 to get a Vector CANCase, which supports up to 2 CAN busses.

What is the difference between CANalyzer and CANoe?

In CANalyzer we can have only ONE simulated node. But in CANoe we can have MULTIPLE simulated nodes. Using CANoe we can have the access to the whole simulated CAN/Flexray bus. CANalyzer only have one node for accessing, so we can have message frames those are flowing in and flowing out for that node.

What is the use of CANalyzer?

CANalyzer is the comprehensive software tool with intuitive operation for analysis and stimulation of network communication. Use CANalyzer to check whether and what type of communication is occurring on the network. In addition to sending or recording data, interactive ECU diagnosis is also possible.

CAN FD can XL?

CAN XL has as CAN FD two bit-rate phases. In the arbitration phase the bit-rate is limited to 1 Mbit/s as in Classical CAN and CAN FD. In the data-phase, the bit-rate can be increased, because just one node is transmitting.

What is CANalyzer tool?

CANalyzer is an analysis software tool from Vector Informatik GmbH. This development software is widely used, primarily by automotive and electronic control unit suppliers, to analyze the data traffic in serial bus systems.

How do I enable XCP in canoe?

There are two possibilities. The first one is to set all possibly required XCP variables to Configured, so that they can be accessed with the CAPL code. These variables can then be controlled f.e. with the CAPL command XcpActivate(sysvar::XCP::XcpSim::ampl) which activates the Auto Read checkbox.

Does VN1630A support can FD?

The VN1600 interface family provides a flexible and fast access to CAN (FD) and LIN networks. While the VN1610/ VN1611 with 2 channels focuses on minimum size and weight, the VN1630A/VN1640A with 4 channels is designed for flexibility and IO support.

Why CAPL scripting is used in CANoe tool?

CAPL is a scripting language that is used to access the CAN protocol with Logical operations. With this, it is possible simulate anything on CAN network using the script code which is almost like C. The script can be used with Vector CANOe and Vector CANalyzer.