What type of oil does a d16y8 use?
SAE 5W-30 is preferred. Capacity: 3.2 quarts. . w/ofAfter refill check oil level.
How much oil does a d16a6 take?
Engine Oil
| Viscosity: | 10W-30 (Above -7) 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 3.7 quarts. . (with filter)After refill check oil level. |
| Torque: | 33 ft/lbs (Oil Drain Plug) |
What oil does a Honda engine take?
Honda Recommended Lubricants
| Type | Product |
|---|---|
| Engine Oil (Petrol) | 5W-40 Semi-Synthetic Fuel Efficient Oil |
| Engine Oil (Petrol) | 0W20 Semi-Synthetic Fuel Efficient Oil |
| Engine Oil (Diesel) | 0W30 Fully Synthetic ACEA C2/ C3 |
| Engine Oil (Hybrid) | Honda Green Oil |
What oil does a d15b7 use?
Engine Oil SAE 5W-30 is preferred. Capacity: 3.2 quarts. w/ofAfter refill check oil level.
What oil does a 96 civic take?
Engine Oil
| Viscosity: | 10W-30 (Above -7) 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 3.5 quarts. w/ofAfter refill check oil level. 3.8 quarts (with filter)After refill check oil level. |
| Torque: | 33 ft/lbs (Oil Drain Plug) |
How much oil does a d16y5 take?
3.5 quarts. . (with filter)After refill check oil level.
How much oil does a 1988 Honda Civic take?
Capacity: 3.9 quarts (with filter)After refill check oil level.
Is 5W-30 the same as SAE 5W-30?
Originally Answered: Is SAE 30 the same as 5w30? No. SAE 30 is a single viscosity motor oil. Only multi viscosity motor oils only should be used in any car.
What kind of engine does a Honda D16Y8 have?
The Honda D16Y8 is a 1.6L 4-cylinder VTEC engine with a single overhead cam (SOHC). Right off the production line in 1996 it had 127 hp and 107 lb-ft of torque. The engine was only produced for four years before it was replaced by the Honda D17 series engine, however it is still popular to this day.
What is the difference between a D16Y7 and a D16Y8?
The D16Y7 base model engine had only 106 hp compared to 127 hp in the D16Y8 with VTEC. In 2001 the D16Y8 was phased out in in favor of the D17A2 which had larger displacement thanks to a longer stroke and other modifications.
What are the specs of a B18B engine?
Specifications of B18B camshafts: duration 274/278 deg, lift 9.98/9.65 mm. The power was 142 HP @ 6,300 rpm and the torque was 172 Nm @ 5,200 rpm, with the rev limit of 7,200 rpm. This engine was intended for Acura Integra, Honda Integra, JDM Honda Domani and Orthia. 3. B18B2 was the B18B1 for Australia 4.
What is the difference between D16B5 and D16V1 engines?
D16B5 was an engine to operate on LNG. A 16-valve SOHC VTEC-E head was used in it, along with new pistons, and the compression ratio increased to 12.5. 9. D16B6 was an analogue to D16B2 for Honda Accord. 10. D16V1 was an engine for the European Honda Civic. It uses a SOHC VTEC-E head and the compression ratio increased to 9.4.