What causes washing machine not to wash?

There are a few possible reasons for this: – The locking mechanism could have jammed (maybe some clothes have gotten in the way). – There could be a glitch in the washer’s computer. – The washing machine may not be draining properly, leaving the washer door locked and the drum filled with water.

Why is my washer not agitating or spinning?

Common solutions for: My Washer Won’t Spin or Agitate. Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission.

Why is my washer filling up but won’t wash?

If your washer fills with water but doesn’t agitate, the problem is likely to be a faulty lid switch, a broken belt, or a problem with the motor. (Note: Direct-drive washing machines do not have belts.)

How do you fix a washer that will not spin?

  1. Redistribute an off-balanced load of laundry.
  2. Level an off-kilter washer.
  3. Check the power source.
  4. Stop using an extension cord.
  5. Inspect the spin switch.
  6. Stick to high efficiency detergent with a front-load washer.
  7. Undo any kink in the hose.
  8. Track down a blockage in the drainage system.

Why won’t my washing machine turn on?

If your washing machine doesn’t respond when you turn it on there may be a simple fix. There’s a number of solutions that range for serious to simple, but the best place to begin is with the power supply itself. The first thing to check is if your washing machine is getting power. Using a multimeter check the outlet voltage.

How do you fix a washing machine that won’t wash clothes?

Open the lid and place a new article of clothing in the washer and note its position. Close the lid. Let the washer run for a minute or two and open the lid. If the agitator is working properly, the article of clothing should have moved around in the wash. If the washer is not agitating, you may need to reset your washer motor .

What to do if your washing machine timer is not working?

If the drive motor on your washer does not receive power during the wash portion of the cycle, then the timer may be at fault. How to test the timer in a washing machine with a multi-meter: As with most repairs, begin by disconnecting your washer from the power source.

Why won’t my Kenmore washer finish the cycle?

A top-load washer won’t advance to the drain and spin cycle if a broken lid switch is making the timer think the washer lid is open. A washing machine that won’t finish the cycle could also have a broken timer or failed water-level pressure switch.