What jeeps had NV3550?

The NV3550 transmission is a 5-speed manual gearbox commonly used in the 2000-2004 Jeep Wrangler TJ and 2000-2001 Jeep Cherokee XJ.

How much torque can a NV3500 handle?

The Dodge Dakota NV3500-HD version was rated for 340ft-lb of torque.

Is the AX5 a good transmission?

The AX5 is prevalent, but sadly it’s strength is minimal, making it a questionable off-road transmission. Failures behind even stock engines are not uncommon.

What is NV3500 rated for?

What kind of transmission does a 3550 have?

The 3550 is a top-shifting, longitudinally-loaded transmission. It features five speeds with a direct drive fourth gear and an overdriven fifth gear. It is fully synchronized in all gears, except reverse, and has helically cut gears for all speeds.

What kind of transmission does a NV3550 have?

MANUAL – NV3550 DESCRIPTION The NV3550 is a medium-duty, 5-speed, constant mesh, fully synchronized manual transmission. The transmission is available in two and four-wheel drive configurations.

What kind of transmission does a jeep NVG 3550 have?

Jeep NVG 3550 Transmission The New Venture Gear 3550 was released in the Jeep TJ Wrangler and XJ Cherokee in 2000, as the replacement to the AX15 transmission. It is also found in Dodge downsized pickups. It’s last year in the Jeep was 2004, after which it was replaced by the NSG370 six-speed.

How do you remove a NV3550 geartrain?

KJMANUAL – NV3550 21 – 37 MANUAL – NV3550 (Continued) (13) Remove front housing bolts that attach it to the rear housing (Fig. 12). Three bolts at rear of housing are for the output shaft bearing retainer. Leave one of these bolts in place until the geartrain is ready to be removed from case.