Is IP64 suitable for outdoor use?

Your walls, fences and trees will provide protection, and rain is rarely as strong as “heavy seas” anyway! IP44 is generally OK for common garden use and standard weather….What IP ratings should outdoor garden lights have?

IP Ratings: First Digit – Solids
X or 0 No protection or untested.
7 Protection from immersion.

What does IP64 waterproof mean?

IP64. Protected from total dust ingress. Protected from water spray from any direction. IP65. Protected from total dust ingress.

What does IP64 mean in lighting?

IP64 Waterproof Rating: Since the first digit in this IP rating is 6, it gives a strong protection against the solid objects. It is not possible for any solid particle (dust, dirt etc) to affect the LED light. The second digit, 4, implies that the LED provides protection against splashing water only.

What does IP44 mean in lighting?

An IP44 rating means that your product will be protected from solid particles that are over 1mm in size and from low velocity sprays of water from every direction.

Is IP44 good enough for outdoor lights?

IP44 is generally used as the industry benchmark for lights suitable for outdoor use. For light fittings that are fully exposed to harsh weather conditions, pursuing a greater level of protection offered by IP65 or higher may be necessary.

Is IP44 enough for rain?

IP44 outdoor lights can withstand rain and are safe to use outdoors, however should not be exposed to pressurised water such as a jet wash. Splashing water against the enclosure from any direction will not have a harmful effect.

What is IP64 standard?

IP Rating Reference Chart

IP Rating First Digit – SOLIDS
IP62 Protected from total dust ingress.
IP63 Protected from total dust ingress.
IP64 Protected from total dust ingress.
IP65 Protected from total dust ingress.

What does IP40 mean?

Protected from long term immersion up to a specified pressure. IP40. Protected from tools and small wires greater than 1 millimetre. Not protected from liquids.

Can IP44 be used in Zone 1?

Any fitting used in this zone must be low voltage, (max 12v) and be rated at least IP67 which is total immersion proof. Zone 1 is the area above the bath or shower to a height of 2.25m from the floor. In this zone an IP rating of at least IP44 is required.

Is IP44 suitable for heavy rain?

Now comes the question, “Is IP44 Rainproof?” Ip44 is not suitable for heavy rain. Rain is usually considered to be splashing water, and therefore IP44 lights can also be installed outdoors. However, it is advisable to only use such lights directly on the house wall or under a canopy.

Is IP44 suitable for outside?

The IP44 rating is common in outdoor lighting. If you need to jet-clean the light fitting or immerse it in water you’ll need a greater level of protection, but for most purposes the IP44 specification will suffice.

What does IP44 mean?

IP44 refers to a type of lighting approved for use in some areas of the bathroom. The IP code stands for International Protection Rating, which is also called the Ingress Protection Rating.

What does IP66 rated mean?

IP66 Enclosure – IP rated as “dust tight” and protected against heavy seas or powerful jets of water. IP 67 Enclosures – IP rated as “dust tight” and protected against immersion. IP 68 Enclosures – IP rated as “dust tight” and protected against complete, continuous submersion in water.

What is IP44 waterproof?

An IP44 rated connector is often referred to as “splash proof” and protects from objects greater than 1 millimeter in size and water spray from any direction.

What is IP 44 rating?

IP Rating 44. As with Zone 1, Zone 2 should also use IP44 lights and covers the areas 0.6 metres outside of the shower and bath zone. While Zone 3 is any other area outside of the specified zones and doesn’t require IP44 lights. Although it is still recommended to use IP44 lights in this areas for added safety and aesthetics.