Is reactive armor effective?
Reactive armour is a type of vehicle armour that reacts in some way to the impact of a weapon to reduce the damage done to the vehicle being protected. It is most effective in protecting against shaped charges and specially hardened kinetic energy penetrators.
What are they replacing the Bradley with?
optionally manned fighting vehicle
After a handful of unsuccessful attempts to replace the Army’s aging Bradley fighting vehicle, the service hopes it is finally on the right track. Known as the optionally manned fighting vehicle, or OMFV, the program is the Army’s latest attempt to replace the Bradley following years of cost and requirements issues.
How much does reactive armor cost?
Both the BFV and the M113 have ongoing A2-to-A3 upgrade programs, but the costs and benefits of each upgrade are quite different. The BFV upgrade is very expensive ($2.3–2.6 million) and primarily electronic, while the M113 upgrade is almost entirely mechanical and much less expensive (just over $200,000).
How much does reactive armor weigh?
– Individual blocks are proof against effects of small calibre armour piercing incendiary munitions after impact ranging from 12.7 to 30 mm calibre. – The total weight of all blocks of ERA is 2700 kg per one tank whilst the weight of blocks there on turret is 1 170 kg.
Who invented era?
Origin. Statistician and writer Henry Chadwick gets credit for inventing ERA in the mid-to-late 19th century. His thinking was that win-loss record simply didn’t go far enough in determining the mark of a good pitcher. The statistic caught on in the 20th century, when relief pitchers became more prevalent.
Who invented reactive armor?
It was only until the 1970s that the first successful Explosive Reactive Armor was created and patented by the German researcher Dr. Manfred Held.
Who made explosive reactive armor?
Dr. Manfred Held
It was only until the 1970s that the first successful Explosive Reactive Armor was created and patented by the German researcher Dr. Manfred Held.
What is a Merkava tank?
The tank was developed in the Merkava and Armored Combat Vehicles Division of the Israeli Ministry of Defense, and most of its parts are manufactured in Israel. Its design concept is to provide maximum protection for its crew, and therefore its front armor was fortified and the engine placed in the front part of the tank, unlike most other tanks.
How many reactive armor tiles are there for the Bradley Fighting Vehicle?
The Reactive Armor tiles for the Bradley Fighting Vehicle has been type-classified for production. During U.S. Government qualification, over 1,500 armor tiles were extensively tested. The tests included:
What happened to the Merkava Mk IV during Operation Protective Edge?
On March 1, 2011, a Merkava MK IV stationed near the Gaza border, equipped with the Trophy active protection system, successfully foiled a missile attack against it, marking the system’s first operational success. No tanks were damaged during Operation Protective Edge. The Merkava Mk.
What is reactive armor in the Army?
The Reactive Armor technology offers a substantial increase in protection levels for troops and equipment against all shoulder-fired weapons and most tube-launched, shaped-charge systems. The Reactive Armor tiles for the Bradley Fighting Vehicle has been type-classified for production.